Jeep 3.6 engine horsepower




Jeep 3.6 engine horsepower

Article Navigation:
  • Photo
  • All-New Jeep Wrangler - Off-Road Capability Features
  • Video
  • RELATED PAGES
  • The Chrysler Pentastar engine family is a series of aluminium (die-cast cylinder block) dual overhead cam valve gasoline V6 engines introduced for model- year Chrysler, Dodge and Jeep . For , FCA released an updated version of the L engine for the Jeep Grand Cherokee and Dodge Durango.

    Jeep® Brand engineers have enhanced the performance of the legendary L Pentastar® engine. It still delivers horsepower and pound-feet of torque .

    Horsepower and Torque curve for Jeep Wrangler V6 Sahara (aut. 5) ( kW / PS / hp). Data for the car edition of the year up to late- year.

    Jeep 3.6 engine horsepower

    Jeep 3.6 engine horsepower

    I see "upgraded engine" in various threads, but don't see any specifics. New fuel injectors allow for better atomization Internal friction reduced by using HG-R1 on the timing drive guide-faces, low-tension piston rings, new valve springs, carbon coated piston pins Lightest Pentastar ever lbs. The Chrysler Pentastar engine family is a series of aluminium die-cast cylinder block dual overhead cam valve gasoline V6 engines introduced for model-year Chrysler , Dodge and Jeep vehicles. The main bearing caps are a cross-bolted, 6-bolt design. Cylinders are numbered front to rear; the right bank has pistons 1, 3, and 5, the left 2, 4, and 6, with a firing order.

    Jeep 3.6 engine horsepower

    Jeep 3.6 engine horsepower

    Jeep 3.6 engine horsepower

    Jeep 3.6 engine horsepower

    Jeep 3.6 engine horsepower

    Chrysler Pentastar engine - Wikipedia

    In the Ram, the engine is also rated at horsepower, and lb-ft of torque. I think we are also looking at six bolt main caps, but at least four bolts, two or four vertical and two horizontal I think the [open area below the oil returns] are oil drainback holes.

    The feed is at the upper rear of the cylinder on the bank you can see, what appears to be a hole next to the head bolt. A turbocharger could be added without changing the deck machining, using special O-ringed head gaskets or other methods. A twin turbo and single-turbocharger version were originally planned for introduction by ; both would be based on the smallest size 3. The twin-turbo version was projected for a whopping horsepower while the single-turbo was set for hp; developed by Maserati and Ferrari, the 3.

    Jeep 3.6 engine horsepower

    The twin turbo uses different heads and internal parts, with modified blocks, but shares the same basic design; and the blocks are sourced from Chrysler. See more Pentastar engine details, rumors, and plans. Direct injection is being worked on, but is still years off. The heads are different, the blocks are the same. Despite the four variants of the 3. The engine can run on either regular gasoline or E85 fuel without degradation of performance or emissions.

    The engine features high-flow intake and exhaust ports, which in combination with dual independent cam phasing, allows optimum volumetric and combustion efficiency over the full speed and load range. This results in an exceptional, flat torque curve along with high specific power. The intake valve is a single-piece design, made of forged heat resistant martensitic steel; exhaust valves are two-piece designs, with a forged austenitic head welded to a martensitic stem, and both have a nitrided surface treatment to prevent scuffing except at the tip and lock grooves.

    Jeep 3.6 engine horsepower

    Roller rocker arms, pivoting on stationary lash adjusters, activate the valves, which use three bead lock keepers to help rotation and retain the springs.

    One chain, with a spring-loaded tensioner, drives the oil pump; three drive the camshafts. Primary and secondary camshaft chains use oil pressure controlled chain tensioners; the left secondary uses a ratchet, the right secondary and primary do not.

    Chain guides and tensioner arms alike are made of glass-filled nylon, with nylon wear faces. The cylinder heads are made of aluminum, with unique left and right castings and integrated exhaust manifolds.

    Jeep 3.6 engine horsepower

    The valves have pressed-in powdered metal guides, which are not serviceable. The valvetrain uses roller rocker arms with hydraulic lifters. Spark plug tubes are pressed into the heads and sealed in place; the tubes have thin walls, and mechanics were advised to be careful when working with them.

    The cylinder block is a high-pressure die cast aluminum design, with an open deck and cut slots between each cylinder; cast steel cylinder liners increase longevity. Three piston oil cooler jets are mounted to the engine block each cools two pistons and attached to the main oil gallery. Four powdered metal main bearing caps are used; they are cross-bolted, with directional arrows molded in.

    Jeep JK Prodigy Turbo Kit 3.6 L Pentastar Overview



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲